You can perform some AC troubleshooting prior to the complete failure of your cooling system to diagnose the issue and potentially fix it with a home repair. Which are the most frequently used reasons why your air conditioner is not cooling, some of the simple fixes you can do, and when is it necessary to call a professional to repair your air conditioner.
This is not merely an issue - This is usually the first red flag that shows that your air conditioner is in need of repair.
Your AC is not blowing cold air because of such simple issues as a clogged filter or the incorrect thermostat setting, or such serious problems as a leak of refrigerant, frozen coils, or a failed compressor.
When they are not communicate, These problems may contribute to rising energy expenses, indoor air quality and even total breakdown of the HVAC system.
In this guide, we’ll walk you through:
When your air conditioner is not cooling properly, it could be due to small, fixable issues or more serious internal faults. Ignoring the signs can:
Understanding the cause is the first step to getting your comfort back.
Before calling an AC technician, check these quick fixes:
Check the Thermostat Settings
In other cases the thermostat is switched to fan rather than cool. Ensure that it is turned to cool and the temperature is lower than the room temperature.
Inspect and Replace Dirty Air Filters
An air filter that is clogged will block the airflow, and your AC will not blow out cold air. Change or wash filters once a month or in six months.
Reset Circuit Breakers and Power Switches
If the circuit breaker is fall-down, your Air Conditioner may run without cooling. Reset it and make sure the power supply is stable.
The substance that absorbs heat is referred to as refrigerant. Your AC will blow warm air when it is low or it is leaking. Refrigerant can only be checked and filled by a professional.
Coils that are not clean of dust do not allow good heat exchange, and so, they do not cool well. Coil cleaning to regain its performance is part of the regular AC maintenance.
When your AC is operated continuously and the air flow is low, then there is a possibility that the evaporator coil will get covered with ice. Some of the causes are dirty filters, low refrigerant or airflow.
Leaky or blocked ducts decrease the airflow and some rooms become hot whereas other rooms remain cool. Central AC service includes duct inspection.
Even after cleaning and servicing, your AC still fails to cool, then it can be possible that the compressor or the fan motor is not functioning properly a symptom that you need to call an AC repairman.
Not every issue is DIY-friendly. Call a certified HVAC technician if you notice:
The best way to avoid costly air conditioner repair is through regular AC service and maintenance. Here’s a simple schedule:
·Monthly: Service filters or change filters.
·Quarterly: Clean drain lines, vents and coils.
·Every year: Book an expert AC service.
One major reason homeowners skip servicing is cost. But here’s the reality:
Q1: Why is my AC not blowing cold air, but warm air?
Ans :- Most probably because of dirty filters, low refrigerant, or ineffective compressor.
Q2: What is the frequency of service maintenance of my AC?
Ans :- At least once in a year before the high season, as well as regular cleaning of filters.
Q3: Does that mean I can use my AC when it is not cooling?
Ans :-Operating AC that is in a bad condition puts the compressor under stress and may lead to the complete collapse of the system. Get it serviced ASAP.
A non-cooling air conditioner is not necessarily a sign of a huge breakdown. Simple troubleshooting problems can be solved often by carefully adhering to the appropriate AC troubleshooting steps. However, when it comes to refrigerant leaks, electrical faults, or a problem with the compressor, it is necessary to have professional AC repair service as soon as possible.
Have frequent AC maintenance and service to ensure your home is cool, your energy bills are lower, and you are not paying to fix expensive things.